• Contact Us
  • Standards
  • Products
  • About us
  • Home
Category
  • Hose Clamps
  • Pipe Clamps
  • Spring Plungers
  • Self-drilling Screws
  • Self-tapping Screws
  • Wood Screws
  • Screws
  • Nuts
  • Bolts
  • Washers
  • Pins
  • Springs
  • Stainless Steel Cable Ties
Recommend
  • Wedge Lock Washer, DIN 25201
  • GUK Series Nylon Insert Lock Nut
  • DIN 981 KM Rolling Bearing Lock Nut
  • Spring Plungers
  • GN617 Index Plungers
  • Stainless Steel Press Fit Ball Spring Plungers
  • Eye Screws
  • Turbo Oil Feed Banjo Bolt
  • Extruded U Nuts
  • Parallel Pins with Internal Thread
Home » Standards » Washer » DIN 6796

DIN 6796

DIN 6796 , Disc Spring dimension as below.
Dimension of DIN 6796 as below:

DIN 6796 disc spring
Nominal Bolt
Size mm
d1 H14 mm d2 H14 mm s3) mm h max 1) mm h min 2) mm Flattening Force N Residual Spring Force N
2 2.2 5 0.4 0.60 0.50 920 –
2.5 2.7 6 0.5 0.72 0.61 1540 –
3 3.2 7 0.6 0.85 0.72 2350 –
3.5 3.7 8 0.8 1.06 0.92 3160 –
4 4.3 9 1.0 1.30 1.12 4050 1400
5 5.3 11 1.2 1.55 1.35 6700 2300
6 6.4 14 1.5 2.00 1.70 9400 4200
7 7.4 17 1.75 2.30 2.00 13700 6200
8 8.4 18 2.0 2.60 2.24 17200 7700
10 10.5 23 2.5 3.20 2.80 27500 12400
12 13 29 3.0 3.95 3.43 40000 18000
14 15 35 3.5 4.65 4.04 55000 25000
16 17 39 4.0 5.25 4.58 75000 34000
18 19 42 4.5 5.80 5.08 95000 57000
20 21 45 5.0 6.40 5.60 122000 73000
22 23 49 5.5 7.05 6.15 152000 91000
24 25 56 6.0 7.75 6.77 175000 122000
27 28 60 6.5 8.35 7.30 230000 161000
30 31 70 7.0 9.20 8.00 280000 196000


Related Links:

  • DIN 7349
  • DIN 6797
  • DIN 434
  • DIN 988
  • DIN 988
  • DIN 137 A
  • DIN 9250
  • DIN 25201
  • DIN 6798J
  • DIN 6798A
  • DIN 435
  • DIN 93
  • DIN 125A
  • DIN 7980
  • DIN 127B
  • DIN 6916
  • DIN 7989
  • DIN 9021
Powered By Fastenersco.Com Copyright @ 2012-2021 Some Right Reserved XML