• Contact Us
  • Standards
  • Products
  • About us
  • Home
Category
  • Hose Clamps
  • Pipe Clamps
  • Spring Plungers
  • Self-drilling Screws
  • Self-tapping Screws
  • Wood Screws
  • Screws
  • Nuts
  • Bolts
  • Washers
  • Pins
  • Springs
  • Stainless Steel Cable Ties
Recommend
  • Wedge Lock Washer, DIN 25201
  • GUK Series Nylon Insert Lock Nut
  • DIN 981 KM Rolling Bearing Lock Nut
  • Spring Plungers
  • GN617 Index Plungers
  • Stainless Steel Press Fit Ball Spring Plungers
  • Eye Screws
  • Turbo Oil Feed Banjo Bolt
  • Extruded U Nuts
  • Parallel Pins with Internal Thread
Home » Standards » Screws » DIN 7983

DIN 7983

DIN 7983 , Cross Recessed Raised Countersunk Head Self-tapping Screws , Phillips or Pozi drive, raised countersunk head tapping screws.
Dimension of DIN 7983 as below:

DIN 7983 cross recessed raised countersunk head self-tapping screws
Size d2 k f m Cross Recess No.
ST2.2 4.3 1.3 0.7 2.8 H1
ST2.9 5.5 1.7 0.9 3.4 H1
ST3.5 6.8 2.1 1.2 4.6 H2
ST3.9 7.5 2.3 1.3 4.7 H2
ST4.2 8.1 2.5 1.4 4.9 H2
ST4.8 9.5 3 1.5 5.4 H2
ST5.5 10.8 3.4 1.7 7 H3
ST6.3 12.4 3.8 2 – H3
ST8.0 15.8 4.65 – – –

 

1. All size in mm ;



Related Links:

  • ISO 7380
  • DIN 7504 K
  • DIN 968
  • DIN 7973
  • DIN 965
  • DIN 964
  • DIN 963
  • DIN 96
  • DIN 7985
  • DIN 916
  • DIN 915
  • DIN 914
  • DIN 913
  • DIN 912
  • DIN 7982
  • DIN 7981
  • DIN 68163
  • DIN 7505A
  • DIN 7991
  • DIN 571
  • DIN 34817
Powered By Fastenersco.Com Copyright @ 2012-2021 Some Right Reserved XML