• Contact Us
  • Standards
  • Products
  • About us
  • Home
Category
  • Hose Clamps
  • Pipe Clamps
  • Spring Plungers
  • Self-drilling Screws
  • Self-tapping Screws
  • Wood Screws
  • Screws
  • Nuts
  • Bolts
  • Washers
  • Pins
  • Springs
  • Stainless Steel Cable Ties
Recommend
  • Wedge Lock Washer, DIN 25201
  • GUK Series Nylon Insert Lock Nut
  • DIN 981 KM Rolling Bearing Lock Nut
  • Spring Plungers
  • GN617 Index Plungers
  • Stainless Steel Press Fit Ball Spring Plungers
  • Eye Screws
  • Turbo Oil Feed Banjo Bolt
  • Extruded U Nuts
  • Parallel Pins with Internal Thread
Home » Standards » Bolts » DIN 88149

DIN 88149

DIN 88149, Hanger Bolts/ Hanger Screws, which double ends with thread, one side with machine thread, the other side is a lag screws with sharp point. some with torx drive in machine thread part.
Dimension of DIN 88149 as below:

DIN 88149 hanger bolt / screws
Size D L P P1 D1 A B S
M8×80 M8 80 1.25 3.0-3.2 6.85-7.0 20.00 30.00 5.75-6.00
M8×90 M8 90 1.25 3.0-3.2 6.85-7.0 20.00 40.00 5.75-6.00
M8×100 M8 100 1.25 3.0-3.2 6.85-7.0 20.00 45.00 5.75-6.00
M8×120 M8 120 1.25 3.0-3.2 6.85-7.0 20.00 45.00 5.75-6.00
M10×100 M10 100 1.50 3.0-3.2 8.85-9.00 40.00 45.00 7.75-8.00
M10×120 M10 120 1.50 3.0-3.2 8.85-9.00 40.00 60.00 7.75-8.00
M10×140 M10 140 1.50 3.0-3.2 8.85-9.00 40.00 60.00 7.75-8.00

 

1. All size in mm ;



Related Links:

  • DIN 186
  • DIN 608
  • DIN 580
  • DIN 6914
  • DIN 933
  • DIN 605
  • DIN 604
  • DIN 601
  • DIN 603
  • DIN 939
  • DIN 6921
Powered By Fastenersco.Com Copyright @ 2012-2021 Some Right Reserved XML